1. BA, Brass & Model Engineer Threads
  2. Thread BA

Thread BA

Page settings

Appearance

Here you can select the number of cards to be placed in a row for each of supported screen resolutions. Your current resolution is highlighted in this way.

Page size

Total record count: 17.

Cancel Save changes
BA (British Association) Threads used widely in model engineering and electrical fasteners amongs others. The BA thread has an unusual thread angle of 47.5deg and threading inserts difficult to obtain. Most BA threads are cut using taps and dies.
Export
Ba No Outside Dia Inch Tpi Core Dia Inch Radius Thread Depth Thou Hex Across Flats Tapping Drill Size Mm Letter Or Number Drill Clearence Drill Mm
0 0.24 25.4 0.19 0.01 24 0.41 5.1 9 6.2
1 0.21 28.2 0.17 0.01 21 0.37 4.5 16 5.5
2 0.19 31.4 0.15 0.01 19 0.32 4.0 22 4.9
3 0.16 34.8 0.13 0.01 17 0.28 3.4 29 4.2
4 0.14 38.5 0.11 0.00 16 0.25 3.0 31 3.7
5 0.13 43.0 0.10 0.00 14 0.22 2.7 37 3.3
6 0.11 47.9 0.08 0.00 13 0.19 2.3 42 2.9
7 0.10 52.9 0.08 0.00 11 0.17 2.1 46 2.6
8 0.09 59.1 0.07 0.00 10 0.15 1.8 50 2.3
9 0.07 65.1 0.06 0.00 9 0.13 1.6 1/16 2.0
10 0.07 72.6 0.05 0.00 8 0.12 1.4 54 1.8
11 0.06 82.0 0.04 0.00 7 1.2 56 1.6
12 0.05 90.7 0.04 0.00 7 1.1 60 1.4
13 0.05 99.9 0.04 0.00 6 1.0 62 1.2
14 0.04 99.9 0.03 0.00 6 0.8 1/32 1.0

Filter builder