1. Metric Threads
  2. Metric Course

Metric Course

Page settings

Appearance

Here you can select the number of cards to be placed in a row for each of supported screen resolutions. Your current resolution is highlighted in this way.

Page size

Total record count: 40.

Cancel Save changes
There are two kinds of ISO metric threads: coarse and fine. Both have the same profiles.
Export
Nominal Size Iso Mf Major Diameter Mm D=d Pitch Mm P Root Radius Mm R Pitch Diameter Mm D2=d2 Minor Diameter Male D3 Minor Diameter Female D1 Thread Depth Male mm Thread Depth Female mm Tap Drill Diameter Mm
1.0 1.00 0.25 0.04 0.84 0.69 0.73 0.15 0.14 0.8
1.1 1.10 0.25 0.04 0.94 0.79 0.83 0.15 0.14 0.9
1.2 1.20 0.25 0.04 1.04 0.89 0.93 0.15 0.14 1.0
1.4 1.40 0.30 0.04 1.21 1.03 1.08 0.18 0.16 1.1
1.6 1.60 0.35 0.05 1.37 1.17 1.22 0.22 0.19 1.3
1.8 1.80 0.35 0.05 1.57 1.37 1.42 0.22 0.19 1.5
2.0 2.00 0.40 0.06 1.74 1.51 1.57 0.25 0.22 1.6
2.2 2.20 0.45 0.07 1.91 1.65 1.71 0.28 0.24 1.8
2.5 2.50 0.45 0.07 2.21 1.95 2.01 0.28 0.24 2.1
3.0 3.00 0.50 0.07 2.68 2.39 2.46 0.31 0.27 2.5
3.5 3.50 0.60 0.09 3.11 2.76 2.85 0.37 0.33 2.9
4.0 4.00 0.70 0.10 3.55 3.14 3.24 0.43 0.38 3.3
4.5 4.50 0.75 0.11 4.01 3.58 3.69 0.46 0.41 3.8
5.0 5.00 0.80 0.12 4.48 4.02 4.13 0.49 0.43 4.2
6.0 6.00 1.00 0.14 5.35 4.77 4.92 0.61 0.54 5.0

Filter builder